Components checked
Cables, routes, connections, terminals, junction boxes, socket and lighting circuits, circuit breakers, residual-current devices (RCDs) and residual-current circuit breakers with overcurrent protection (RCBOs).
Examination of cable circuits, connections, junction boxes, sockets and protective devices.

Examining wiring requires linking the observed damage to a specific circuit: from the protective device in the panel to the connected load. A single photograph of a melted socket or circuit breaker is insufficient to describe the entire circuit. An overall view of the panel, existing labels, a connection diagram and photographs showing the damaged area alongside other components are useful.
The materials should state what was connected to the circuit at the time of the incident, which devices were operating together and what alterations preceded the fault. Where information comes only from the user's account, it is identified separately from inspection findings and equipment records. An assumed load must not be presented as a measured one.
Individual measurement results are considered within the limits of their method and conditions. For example, checking one section does not automatically describe the condition of concealed wiring throughout the premises. The report should distinguish the defects found from sections that could not be accessed and identify the data needed for further conclusions.
Cables, routes, connections, terminals, junction boxes, socket and lighting circuits, circuit breakers, residual-current devices (RCDs) and residual-current circuit breakers with overcurrent protection (RCBOs).
Heating, darkening, a burning smell, melting, frequent tripping of protective devices, missing labels, insulation damage and signs of moisture ingress.
The design, panel diagram, contract, estimate, records, photographs taken before and after the work, and documents for the cable and protective devices.
A description of the condition of accessible components, defects identified, probable causes and conclusions on the need for local repair or replacement.
Attach the contract, design documentation, estimate, records and photographs, and briefly describe the purpose of your inquiry. If the form does not work, email zapros@elektrika.moscow.